|
|
|
Temperature Measuring Devices with Readouts or Sensors
Stem Thermometers Digital or Analog RTD, Thermocouples and Probes
PTC Metrology™ uses NIST Traceable Standards for Certification and Calibration of...
- Temperature Devices
- PRT's
- RTD's Thermocouples
- Probes
- Thermistors
- Semi-Submersible Instruments
- Data Loggers
- Digital or Analog Stem Thermometers
PTC Metrology™ accredited by A2LA to ISO/IEC 17025 and ANSI/NCSL Z540-1. Certifications are NIST traceable and will include; as received and as returned data;
a statement of uncertainty; laboratory conditions; and information on the primary standards. To assist you in choosing test points please refer to ASTM E-77 and NIST recommendations.
NIST Traceable Certification (non A2LA without logged points)
This certification is best for customers needing only calibration traceability to NIST without the added cost of logging the calibration results, A2LA accredited
certification, or meeting the requirements of ISO 17025. Although no specific points will be logged, UUT's referred to will be calibrated at three or more points over
the UUT's range. This certification will not list any adjustments or out of tolerance conditions. Certification prices do not include labor, adjustment, repairs, or
replacement parts. $80.00 per instrument.
NIST/A2LA Accredited Certification 3 Points (within the range of 0°C to 300°C)
This certification will satisfy most quality requirements by providing NIST traceable as received and as returned calibration results of the UUT (unit under test).
The calibration points will be of PTC®'s choice and will include three points across the UUT's scale. In addition to the readings, certifications will include a statement
of uncertainty, laboratory conditions, and information on the primary standards.
Price $135.00 per instrument within the range of 0°C to 300°C see table below for other temperature points.
NIST Traceable/A2LA Accredited Certification Customer Selected Temp Points
This certification will contain the as received and as returned calibration results of the UUT at the point(s) selected by the customer. The points may be selected from
the chart below. Information on the customer's UUT and PTC®'s calibration standards, statement of uncertainty, laboratory conditions and information on the primary
standards will also be on the certification. Cost of the certification will depend on which temperature points the customer chooses.
To assist you in choosing temperature points, please refer to ASTME-77 and NIST recommendations.
Minimum charge for customer selected temperature points is $95.00 per instrument.
For customer selected temperature points, NIST Traceable / A2LA Accredited, please call toll free 877.782.2329
Temperature Range °C
|
Temperature Range °F
|
Price
|
Liquid Nitrogen approx. -196°C
|
|
$100.00
|
-75°C to -37°C
|
-103°F to <-35°F
|
$92.00
|
-37°C to < 0°C
|
-35°F to < 32°F
|
$68.00
|
Triple Point of water + 0.01°C
|
|
$165.00
|
0°C to 100°C
|
32°F to 212°F
|
$50.00
|
>100°C to 200°C
|
>212°F to 392°F
|
$55.00
|
>200°C to 300°C
|
>392°F to 572°F
|
$67.00
|
>300°C to 370°C
|
>572°F to 700°F
|
$79.00
|
>370°C to 400°C
|
>700°F to 752°F
|
$85.00
|
>400°C to 500°C
|
>752°F to 932°F
|
$95.00
|
>500°C to 1000°C
|
>932°F to 1832°F
|
$125.00
|
Recall Notification
PTC Metrology™ will notify you by email when your instrument is due for recalibration, in accordance with the period of validity that your quality system specifies.
Please register your instrument today.
Contact us | View site map
|
|
|
|