|
|
|
Environmental Thermometers Digital or Analog
Using NIST Traceable Standard
PTC Metrology™ is Accredited by A2LA to ISO/IEC Guide 17025 and ANSI/NCSL Z540-1. NIST Traceable Certifications will include; as received and as returned data; a statement of
uncertainty; laboratory conditions; and information on the primary standards and/or M&TE. Many quality systems require that calibrated or certified thermometers be used where
accurate measurements are of critical importance. PTC® Instruments has manufactured and calibrated thermometers for over 65 years.
Purchase Thermometers from PTC® Instruments
The scope of our accreditation can be down loaded by using the following link Accreditation and Scope.
NIST/A2LA Accredited Single Point Certification at Ambient Temperature & Relative Humidity
System Best Uncertainty of ± 150mk.
This certification will include as received and as returned data, laboratory conditions, statement of uncertainty, and information on the primary standards and/or M&TE.
Price $80.00 for ambient temperature and $95.00 for ambient humidity.
NIST Traceable Certification Customer Selected Temp Points
This certification will contain the before and after calibration results of the UUT at the point(s) selected by the customer. The temperature points may be selected by the chart below.
Information on the customer's UUT and PTC's calibration standards will also be on the certification. Minimum Fee is $95.00 per instrument.
Termperature Range C
|
Temperature Range F
|
Price
|
-15 C to -8 C
|
-5 F to 17.6 F
|
$85.00
|
>23 C to 100 C
|
>73.4 F to 212 F
|
$65.00
|
>100 C to 250 C
|
>212 F to 482 F
|
$75.00
|
NIST Traceable Air Immersion Thermometer Certification 3 Points
This certification will satisfy most quality requirements by providing NIST traceable as received and as returned calibration results of the UUT (unit under test).
The calibration points will be of PTC's choice and will include three points across the UUT's scale within the range of -15°C to 250°C . Certifications will include as received and as returned data, laboratory conditions, and information on the primary standards and/or M&TE
Price $150.00 per instrument
NIST Traceable Basic Certification (non A2LA) - without logged points
This certification is best for customer's needing only calibration traceability to NIST without the adding the cost of logging the calibration results. Although no specific points
will be logged, UUT's referred to will be calibrated at three or more points over the UUT's range. This certification will not list any adjustments or out of tolerance conditions.
Price $80.00
*Please note that certification prices do not include any labor, adjustments, repairs or parts.
Recall Notification
PTC Metrology™ will notify you by email when your instrument is due for recalibration, in accordance with the period of validity that your quality system specifies.
Please register your instrument today.
Contact us | View site map
|
|
|
|